Folding door
Manufacturer of the Compact door

3.5 Product Specification

ROLFLEX COMPACT-TYPE SECTIONAL DOOR

The Compact door is an insulated industrial door where on opening, a patented universal rail system folds the door panels together directly above the doorway.

Door construction

Sandwich panels 610 mm high and 40 mm thick reinforced by means of aluminium U- sections.

  • Insulating material: hard polystyrene
  • Internal and external lining: aluminium stucco, total thickness 0.8 mm
  • Insulation value k = 0.76 W(m²K) (DIN EN 12428)

Safety and standard EN 13 241-1

The doors bear the CE mark and comply with the latest European standards and guidelines. Standard safety features include:

  • Fall protection.
  • Slack cable protection.
  • Anti-lift protection.
  • Steel cables with a safety factor of 6.
  • Rails with finger protection guard + warning markings
  • Water permeability class 2 (DIN EN 12425)
  • Air permeability class 2 (DIN EN 12426)
  • Sound reduction ± 20 dB(A) (EN ISO 717-7)

Standard wind classification without storm package for widths (DIN EN 12424)

  • Up to 5000 mm class 3
  • From 5000 mm to 6500 mm class 2
  • Over 6500 mm class 1

Standard wind classification with storm package for widths (DIN EN 12424)

  • Up to 5000 mm class 5
  • From 5000 mm to 6500 mm class 3
  • Over 6500 mm class 2

Doors over 6000 mm wide will automatically come with the storm package.

Sandwich panel colours

The list of RAL colours to choose from for the inside and outside of the door is shown below:

Standard colours (RAL):

  • 3002 carmine red
  • 5010 gentian blue
  • 5017 traffic blue
  • 6005 moss green
  • 7016 anthracite grey
  • 7032 pebble grey
  • 9002 grey white
  • 9006 white aluminium
  • 9007 grey aluminium
  • 9016 traffic white

Glazing

Different glazing options are available:

Full-vision glass panels

Panels constructed using aluminium box profiles with section for the filling of choice.

Standard colours:

  • Anodised aluminium
  • RAL 9002 Grey white

With full-vision glass panels, you have the following fillings to choose from:

  • Double-glazed acrylate (17 mm)
  • Double-glazed polycarbonate (17 mm)
  • Single-glazed acrylate (4 mm)
  • Single-glazed polycarbonate (4 mm)
  • Single-glazed reinforced safety glass (4 mm)
  • Galvanized casing with mesh measuring 50 x 50 mm (4 mm)
  • Insulated sandwich insert panels (17 mm)
  • Insulated twin-wall polycarbonate (17mm)

These will be fixed in the aluminium full-vision glass panels using plastic snap-in strips depending on the thickness of the fillings (4 mm or 17 mm). The click lists are in a white colour.

Double-glazed snap-in windows:

Black plastic casing with double-glazed acrylate. Suitable for use in sandwich panels. Insulation value: K = ± 2.8 W/m²K (DIN EN 12428)

  • Rectangular windows – 680 x 370 mm (w x h, external dimensions)
  • Oval windows – 725 x 325 mm (w x h, external dimensions)

Electrical operation

Motor 400V

  • 3-phase, ± 4 amp; plug, 5-pole, 16 amp
  • Speed 20 cm/s approx.
  • Unwind protection provided as standard
  • Impermeability class IP54
  • Operating time 60%
  • Emergency manual operating facility provided in the form of a crank handle as standard

Motor 230 V

  • 1-phase or 3-phase; ± 4 amp; standard plug
  • Speed 15 cm/s approx.
  • Fall protection provided as standard
  • Impermeability class IP54
  • Operating time 25% (up to a door weight of 155 kg max.)
  • Emergency manual operating facility provided in the form of a crank handle as standard

Control system

CS300 control system with digital limit switches. Control box with push buttons for up- stop-down.

Operating design options

Electrical operation with dead man’s button (automatic opening, keep button pressed to close)
Electrical operation with a light curtain obstacle detection system (automatic opening and closing)

NOTE: If space at the side is limited (< 320 mm), a top-mounted motor will be required
If space at the side is limited (< 320 mm) and there is also limited space above, a front-mounted motor will be required

Electrical options

  • 400 V high-speed motor, max.60cm opening speed.
  • motor and control box in IP 65 design, 80% duration time (impermeability class)
  • emergency chain opener
  • standard photocell with support (sender/reflector)
  • carwash photocell (sender/receiver)
  • remote controlled operation (receiver with 4-channel handheld transmitter)
  • additional 4-channel transmitter
  • 99-channel transmitter
  • Pin code unit
  • key switch incl. 3 keys
  • key switch with 3 buttons for up-stop-down, incl. 3 keys
  • additional push button
  • cylinder lock for control box
  • pull switch
  • radar
  • warning light (red, green or orange)
  • control lock on the control box
  • summer – winter switch
  • emergency button on the control box
  • LED or LCD monitor for programming controls

The universal system includes the following components as standard

  • hinges made of stainless steel
  • hot-dip galvanized rails, end caps, guide arms and fixings
  • rubber seals
  • cable break protection
  • floor-mounted fall and anti-lift protection consoles
  • fixings
  • slack cable protection
  • self-lubricating bearing rollers
  • motor mount galvanized

Options

  • powder coating of hardware for extra protection, in RAL 9006
  • powder coating of rails in the RAL colour of your choice
  • extended rails, raised assembly
  • Stainless steel fasteners (stainless steel screws, improved water dispersion panels)

Ventilation

Ventilation grating 452 cm²

  • 680 x 375 mm (w x h)
  • Anodised aluminium
  • Net air opening 452 cm²

Ventilation grating 215 cm²

  • 450 x 90 mm (w x h)
  • Black plastic
  • Net air opening 215 cm²

Ventilation grating 185 cm²

  • 407x 307 mm (w x h)
  • Aluminium RAL 9010 (white)
  • Net air opening 185 cm²
  • Lockable

Ventilation grating 45 cm²

  • 450 x 90 mm (w x h)
  • Aluminium RAL 9010 (white)
  • Net air opening 45 cm²
  • Lockable

Locking

Anti-lift protection provided as standard

Wicket door

  • Net dimensions: 850 x 2100 mm approx. (w x h) from the floor
  • Height of threshold is 120 mm approx.
  • Protection provided by wicket door contact
  • Cylinder lock fitted, with 3 keys
  • Door closer on bottom
  • Door catch on top
  • Hinge DIN left or DIN right as chosen by customer

Suitable for use up to a maximum door width of 5000 mm and a minimum door height of 2400 mm. On account of the bottom profile, an extra 50 mm of space is required at the top.

Options

  • Panic lock
  • KABA lock

Side door with fixed insert panel (fascia panels)

A pass door with galvanized steel casing directly adjacent to the Compact door

  • cylinder lock fitted, with 3 keys
  • constructed using panels to match the Compact door
  • sandwich panels above pass door installed up to the height of the Compact door as standard.
  • door closer on top

Other options:

  • a separate protective cover for door panels and motor, colour powder coated up to a width of 5 metres max.
  • Storm package consisting of aluminium stiffening profiles between the panels and in the bottom panel. This is provided as standard for widths of over 6000.

 

Request quotation
Contact me
Contact me

The form was send succesfully

Name:
Email/Telephone:
Error: Database connection failed. LiveZilla Live Chat Software