 |
 External
installation
It is easy to install a Compact Door on the outside of
a building. For example when there is no internal space avialable. A
protection shield and powder-coated
rails are recommended. |
|
|
 |
Motor
protection switch
Next you see the animation of the red safety cut-out toggle. It should be positioned
over the emergency opening to
prevent the motor running while the crank handle is being used. |
|
|
 |
Slack cable
device
The cable should be positioned in the white wheel of
the slack cable device. The cable should be tense. If
not check the cable- connection on the bottom of the door. |
|
|
 |
Operation
of the fall safety device
Next you will see a fall safety device,
which prevents the door falling down in the case of emergency.
After operation of this safety device always contact your supplier to
carry out an on-site inspection.
|
|
|
 |
The cable should be placed around the
turning wheel.
|
|
|
 |
Manual operation with a crank handle
In an emergency, e.g. a
power failure, the door is easy to open with the manually operated
crank handle. |
|
|
|
|
|
|
|